Dev/OPi/OPiZeroPlus: Difference between revisions

From Embeded Linux (and more) Wiki by Nathael
< Dev‎ | OPi
Jump to navigation Jump to search
(Created page with "{{DISPLAYTITLE:Orange Pi Zero Plus}} == Description == Official website : https://orangepi.com/index.php?route=product/product&product_id=848 The "OrangePi Zero Plus" board...")
 
No edit summary
 
Line 11: Line 11:
* The "SD card creation" section from the [[Dev/OPi/OPiZeroPlus/From_Scratch|"from scratch" page]] also provides information to use the u-boot, kernel image, and Devuan root filesystem I built. <br />
* The "SD card creation" section from the [[Dev/OPi/OPiZeroPlus/From_Scratch|"from scratch" page]] also provides information to use the u-boot, kernel image, and Devuan root filesystem I built. <br />
You can get the images here: [http://data.nathael.net/Dev/OPi/OPiZeroPlus/ Images for Orange Pi Zero Plus board].
You can get the images here: [http://data.nathael.net/Dev/OPi/OPiZeroPlus/ Images for Orange Pi Zero Plus board].
== Onboard Wifi ==
Currently testing informations from [https://linux-sunxi.org/Wifi#SDIO-based Sunxi wiki].
git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
cd rtl8189ES_linux.git
git checkout -B rtl8189fs origin/rtl8189fs
make -j8 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- KSRC=../Build/vanilla/


== Connection and startup ==
== Connection and startup ==

Latest revision as of 01:54, 12 August 2022


Description

Official website : https://orangepi.com/index.php?route=product/product&product_id=848

The "OrangePi Zero Plus" board is an Open-source Single Board Computer (SBC) of 48x46mm created and sold by Xunlong.

Base system

You can get the images here: Images for Orange Pi Zero Plus board.

Onboard Wifi

Currently testing informations from Sunxi wiki.

git clone https://github.com/jwrdegoede/rtl8189ES_linux.git
cd rtl8189ES_linux.git
git checkout -B rtl8189fs origin/rtl8189fs
make -j8 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- KSRC=../Build/vanilla/

Connection and startup

USB-UART serial console connection

UART debug port

On the J3 connector (3 pins male 2.54mm, next to the Ethernet connector, pin 1 on the board edge) :

pin 1 - GND : Black
pin 2 - UART RX : Orange
pin 3 : UART TX : Yellow

SD card boot

The OrangePi Zero board boots from the SD card which has to be prepared following specific steps. Follow the "SD card creation" section from the "from scratch" page

Extension ports

The OrangePi Zero Plus board has two extension ports using common 2.54mm (0.1inch) pitch:

  • con4 : 2x13
  • con5 : 1x13
File:Orange Pi Zero Plus Expansion Header.jpg
Orange Pi Zero Plus Expansion Header
con4 : 2x13 Header
1 3.3V 2 5V
3 TWI0_SDA / PA12 / GPIO12 4 5V
5 TWI0_SCK / PA11 / GPIO11 6 GND
7 PWM1 / PA06 / GPIO6 8 UART1_TX / PG06 / GPIO198
9 GND 10 UART1_RX / PG07 / GPIO199
11 UART2_RX / PA01 / GPIO1 12 SIM_CLK/PA_EINT7 / PA07 / GPIO7
13 UART2_TX / PA00 / GPIO0 14 GND
15 UART2_CTS / PA03 / GPIO3 16 TWI1-SDA / PA19 / GPIO19
17 3.3V 18 TWI1-SCK / PA18 / GPIO18
19 SPI1_MOSI / PA15 / GPIO15 20 GND
21 SPI1_MISO / PA16 / GPIO16 22 UART2_RTS / PA02 / GPIO2
23 SPI1_CLK / PA14 / GPIO14 24 SPI1_CS / PA13 / GPIO13
25 GND 26 SIM_DET/PA_EINT10 / PA10 / GPIO10


con5 1x13 Header
1 5V
2 GND
3 USB-DM2
4 USB-DP2
5 USB-DM3
6 USB-DP3
7 LINEOUTR
8 LINEOUTL
9 TV-OUT
10 MIC-BIAS
11 MIC1P
12 MIC1N
13 CIR-RX

External links

(Pseudo)random list of links to pages with information to compile u-boot, the Linux kernel, and create a root filesystem.