Dev/Host - Revision history

Drizzt: /* Configuration */

2019-10-17T22:47:09Z

Configuration

← Older revision		Revision as of 00:47, 18 October 2019
Line 4:		Line 4:
	== Configuration ==		== Configuration ==
	=== [[Dev/Host/NetworkSharing\|Network Sharing with targets]] ===		=== [[Dev/Host/NetworkSharing\|Network Sharing with targets]] ===
			=== [[Dev/Host/Firewall\|Firewall : iptables script for sysvinit]] ===

Drizzt: /* Network Sharing with targets */

2019-10-17T18:17:23Z

Network Sharing with targets

← Older revision		Revision as of 20:17, 17 October 2019
Line 2:		Line 2:
	=== [[Dev/Host/Minicom\|Minicom]] ===		=== [[Dev/Host/Minicom\|Minicom]] ===

	== [[Dev/Host/NetworkSharing\|Network Sharing with targets]] ==		== Configuration ==
			=== [[Dev/Host/NetworkSharing\|Network Sharing with targets]] ===

Drizzt at 18:16, 17 October 2019

2019-10-17T18:16:54Z

← Older revision		Revision as of 20:16, 17 October 2019
Line 1:		Line 1:
	== Tools ==		== Tools ==
	=== [[Dev/Host/Minicom\|Minicom]] ===		=== [[Dev/Host/Minicom\|Minicom]] ===

			== [[Dev/Host/NetworkSharing\|Network Sharing with targets]] ==

Drizzt: Replaced content with "== Tools == === Minicom ==="

2019-10-17T02:08:19Z

Replaced content with "== Tools == === Minicom ==="

← Older revision		Revision as of 04:08, 17 October 2019
Line 1:		Line 1:
	== Tools ==		== Tools ==
	=== Minicom ~~===~~		=== [[Dev/Host/Minicom\|Minicom]] ===
	Minicom ~~is a serial communication program with many many features which make it very usefull to connect to targets.~~

	~~==== Configure ====~~
	~~Despite what you will read on many places : '''you do not need to be root to run or configure minicom !!!''' (but you will need a well configured system).~~

	First, you must add the users which should be allowed to run minicom to a group with read and write access to the ttys you want to use, which are most of the time under the "dialout" group (ttyS, ttyUSB, ttyACM*, ...).
	~~This, of course, is done by the system administrator (root or any user allowed to run the adduser command) :~~
	~~adduser username dialout~~
	This will only be effective for the next login of the user "username". So if you are already logged in a graphical session and do not want to logout and login back, you can simply use the command "su username" in a terminal to get a new session in which you are in the dialout group for the current session and have access (in this terminal) to the ttys which are in the dialout group.

	~~Then you may want to be able to store new configurations.<br />~~
	~~Indeed, one option is to run "minicom -s" as root, change the configuration, and "Save setup as.." to store the configuration~~
	~~under /etc/minicom/.<br />~~
	~~But this will create system-wide configurations (Ok, you may be the only user of your system ... but that's not an excuse to do things the wrong way)<br />~~

	~~When you run minicom with a configuration name, for example "minicom [options~~] ~~my_config" then minicom will also look for a configuration file named "$HOME/.minirc.my_config" ... in your home directory !<br />~~
	~~Of course, you can try to create your config manually by looking at examples in /usr/share/doc/minicom/examples or looking over the web for sample configurations, but there's a much more simple way :~~
	* Create a file called, for example "$HOME/.minirc.ttyUSB0" which contains the following line : "pu port /dev/ttyUSB0" (replace "/dev/ttyUSB0" by the name of the tty you want to use).
	~~echo "pu port /dev/ttyUSB0" > ~/.minirc.ttyUSB0~~
	~~I'm using "ttyUSB0" as the config name for the "/dev/ttyUSB0" tty as I feel like it's easy to remember, but the config name can be anything you would remember.~~
	~~Then run minicom with this config name (the tty must be present, plug your USB-serial adapter if it's not the case yet) :~~
	~~minicom ttyUSB0~~
	You can now configure minicom by hitting "Ctrl+a" and "o" ... and instead of "Save setup as dfl" you get "Save setup as ttyUSB0". Make the required changes to your configuration, and use this menu entry to save your configuration.

	Now, to create many configurations (say, for ttyUSB1, ttyUSB2, you can simply copy the "~/.minirc.ttyUSB0" file and even edit the copy directly and change the "pu port" line to get the same config for these other ttys.

	==== ~~Usage ====~~
	~~A simple way to start minicom is, '''as regular user''':~~
	~~minicom -ow -D /dev/ttyUSB0 [-C log_file]~~

	~~But if you've followed the steps of the previous section and saved your configuration under "ttyUSB0", then you can simply~~
	~~minicom ttyUSB0 [-C log_file]~~
	~~The "-C log_file" option is not required, but if present it will create a file called "log_file" and log all trafic to it (or append to it if the file exists)~~

Drizzt: Created page with "== Tools == === Minicom === Minicom is a serial communication program with many many features which make it very usefull to connect to targets. ==== Configure ==== Despite wh..."

2019-10-17T01:57:49Z

Created page with "== Tools == === Minicom === Minicom is a serial communication program with many many features which make it very usefull to connect to targets. ==== Configure ==== Despite wh..."

New page

== Tools ==
=== Minicom ===
Minicom is a serial communication program with many many features which make it very usefull to connect to targets.

==== Configure ====
Despite what you will read on many places : '''you do not need to be root to run or configure minicom !!!''' (but you will need a well configured system).

First, you must add the users which should be allowed to run minicom to a group with read and write access to the ttys you want to use, which are most of the time under the "dialout" group (ttyS*, ttyUSB*, ttyACM*, ...).
This, of course, is done by the system administrator (root or any user allowed to run the adduser command) :
adduser username dialout
This will only be effective for the next login of the user "username". So if you are already logged in a graphical session and do not want to logout and login back, you can simply use the command "su username" in a terminal to get a new session in which you are in the dialout group for the current session and have access (in this terminal) to the ttys which are in the dialout group.

Then you may want to be able to store new configurations.<br />
Indeed, one option is to run "minicom -s" as root, change the configuration, and "Save setup as.." to store the configuration
under /etc/minicom/.<br />
But this will create system-wide configurations (Ok, you may be the only user of your system ... but that's not an excuse to do things the wrong way)<br />

When you run minicom with a configuration name, for example "minicom [options] my_config" then minicom will also look for a configuration file named "$HOME/.minirc.my_config" ... in your home directory !<br />
Of course, you can try to create your config manually by looking at examples in /usr/share/doc/minicom/examples or looking over the web for sample configurations, but there's a much more simple way :
* Create a file called, for example "$HOME/.minirc.ttyUSB0" which contains the following line : "pu port /dev/ttyUSB0" (replace "/dev/ttyUSB0" by the name of the tty you want to use).
echo "pu port /dev/ttyUSB0" > ~/.minirc.ttyUSB0
I'm using "ttyUSB0" as the config name for the "/dev/ttyUSB0" tty as I feel like it's easy to remember, but the config name can be anything you would remember.
Then run minicom with this config name (the tty must be present, plug your USB-serial adapter if it's not the case yet) :
minicom ttyUSB0
You can now configure minicom by hitting "Ctrl+a" and "o" ... and instead of "Save setup as dfl" you get "Save setup as ttyUSB0". Make the required changes to your configuration, and use this menu entry to save your configuration.

Now, to create many configurations (say, for ttyUSB1, ttyUSB2, you can simply copy the "~/.minirc.ttyUSB0" file and even edit the copy directly and change the "pu port" line to get the same config for these other ttys.

==== Usage ====
A simple way to start minicom is, '''as regular user''':
minicom -ow -D /dev/ttyUSB0 [-C log_file]

But if you've followed the steps of the previous section and saved your configuration under "ttyUSB0", then you can simply
minicom ttyUSB0 [-C log_file]
The "-C log_file" option is not required, but if present it will create a file called "log_file" and log all trafic to it (or append to it if the file exists)